Alright, let's get some progress !
I have continued with the wing, and glued the upper spar in place, so as the fake LE and the TE...
A bit of bad names with the TE, as you need something like 3 hands to put it in place!
![Tongue :P](http://www.gliderireland.net/forum/Smileys/default/tongue.gif)
But with a bit of patience, finally done it after 10 minutes...
![](http://www.gliderireland.net/forum/images/uploads/Fred/vueaile.JPG)
The wing root is also made. The angle of the first rib is 2 degrees for the diedhral. And a triangular piece gives the right angle to the front rib.
![](http://www.gliderireland.net/forum/images/uploads/Fred/rootaile.JPG)
And the fake LE
![](http://www.gliderireland.net/forum/images/uploads/Fred/fauxba.JPG)
Then, I focused on the wing tip.
Really easy, all the pieces are interlocking with each other !
First the ribs
![](http://www.gliderireland.net/forum/images/uploads/Fred/Saumon1.JPG)
Then the tip frame in 2mm plywood
![](http://www.gliderireland.net/forum/images/uploads/Fred/saumon2.JPG)
And finally, all glued with epoxy to the wing. I also added 2 small pieces of reinforcement, but that is not really necessary, just for peace of mind...
![](http://www.gliderireland.net/forum/images/uploads/Fred/collagesaumon.JPG)
And that's it !
Left is the aileron to complete, the webbing and sheeting, and the piece de resistance, the Airbrakes mounting brakets and so on !
![](http://www.gliderireland.net/forum/images/uploads/Fred/vueaile2.JPG)