Author Topic: Futaba 2.4 Fasst Reciever (6-8 channel)  (Read 5611 times)

error404

  • Newbie
  • *
  • Posts: 120
    • View Profile
    • http://www.rubberprintdesign.com
Futaba 2.4 Fasst Reciever (6-8 channel)
« on: July 19, 2010, 10:13:31 AM »
Hi all,

I am looking for a Futaba 2.4 Fasst Reciever preferrably 6 channel (7 or 8 channel is fine too). R606FS is the name of one i have already.

If anyone is thinking of selling one otherwise I will have a look around the internet to see. Any goods sites you can recommend maybe?

Thanks

Anthony
www.rubberprintdesign.com
Vinyl Lettering / Decals / Labels for your models.
T-Shirts / Polos / Jackets / Hoodies for you.
Mousemats / Jigsaws / Mugs / Posters / Keyrings

Happy Days

  • ISR Club Member
  • Newbie
  • *
  • Posts: 2184
    • View Profile
Futaba 2.4 Fasst Reciever (6-8 channel)
« Reply #1 on: July 19, 2010, 19:17:12 PM »
Hi Anthony,
There are gallons of them on Ebay. I use the original Ebay (USA) site as most of the sellers will export to Europe. And one, ‘powerhobby2’ gives free shipping.

I’ve bought 10 new Futaba rx’s off the internet/Ebay and never had a problem with any of them. Average price was about $75 including shipping

Good luck/bidding

Keith
Try not to run out of airspeed, altitude and ideas....... all at the same time.

Happy Days

  • ISR Club Member
  • Newbie
  • *
  • Posts: 2184
    • View Profile
Futaba 2.4 Fasst Reciever (6-8 channel)
« Reply #2 on: July 20, 2010, 06:45:14 AM »
Just done a quick comparison Anthony, for my own interest. :wink:

(Futaba don’t make the 606 rx any more)

The average price for a R617FS rx, (7channel)  that I can find outside Europe is around $85 incl shipping. (About £56)

By comparison, S.M.C. in England have just reduced the price of their 617’s from £70 to £58. Although there would be shipping costs from England to go on top of that figure.

I can remember when Futaba 2.4 rx's were nearly a hundred quid each.
(OOooppppsss, I feel another grey hair growing! :cry: )
Try not to run out of airspeed, altitude and ideas....... all at the same time.

error404

  • Newbie
  • *
  • Posts: 120
    • View Profile
    • http://www.rubberprintdesign.com
Futaba 2.4 Fasst Reciever (6-8 channel)
« Reply #3 on: July 20, 2010, 09:24:00 AM »
Thanks Keith, I think most place are around £65-£75 + postage. Will have a look on ebay and see what's available.

regards

Anthony
www.rubberprintdesign.com
Vinyl Lettering / Decals / Labels for your models.
T-Shirts / Polos / Jackets / Hoodies for you.
Mousemats / Jigsaws / Mugs / Posters / Keyrings