Author Topic: StrangeBird 28'' (Read 10498 times)

IceWind · « **on:** March 31, 2008, 00:12:08 AM »

Ok this kit has been with me for quite some time, but i decided to bring it here and here and finally start to build it.

I will not show the supposed final aspect of it, so that way if i do some mistake no one will notice.

Starting to assemble the wing frame.

All the parts of the wing frame.

Build of the nose, yes this plane has a nose too.

Detail of the nose, those two parts on the photo will hold the third one that is mean to give support to the nose wheel. Steerable!

Side nose covering, some thin balsa is used to cover the sides. On those holes will pass a CF tube and the servo wires.

Final look of it today. Still alot to be done.

During the transpost to Ireland some weaker parts got broken.

So i had to improvise and fix them.

Oh, and the rudder. I started by building this one and i almost forgot the photo of it. Well actually is the vertical stab because there will be no rudder on this plane.

Fred · « **Reply #1 on:** March 31, 2008, 07:28:45 AM »

Looking good Fernando ! :clap:

And nice set of tea cups too !

IceWind · « **Reply #2 on:** March 31, 2008, 09:25:48 AM »

Thanks Fred.

Just a little correction those are not mine!
They are Expresso Cups, Ana brought them from Portugal because here coffee is drink in buckets!

Peter · « **Reply #3 on:** April 01, 2008, 20:52:31 PM »

Looks like a very interesting model Fernando - look forward to seeing it in the air!

Fred · « **Reply #4 on:** July 02, 2008, 10:12:08 AM »

So Fernando, what's the story with this wing ? :?:

IceWind · « **Reply #5 on:** July 02, 2008, 20:42:56 PM »

Well unfortunately work hasn't left much free time lately.
But i have progress on that.
I'll post some photos, it's still not done i was going to the part i have to sheet part of the wing with really thin balsa.

News:

Author Topic: StrangeBird 28'' (Read 10498 times)