For sale is my project to make a Crystal glider.
Scale is 1/3 - 5m ws
Let's face it, I will never finish it!
Kit is an original MCM Crystal, number 5 from the molds! produced in 1995!
Included:
Wings: might need a repaint... Or a good clean. The wings are creamish, but that is scale! I would change the wiring, but saying that, it flew for years as is without issues (du grand Benoit as we say... And if you know Benoit...
Not in photos, but wing joiner is in also. All servos are in etc of course.
Elevator: Has an impact. Same as the wings, flew like that, not structural at all, just the rudder horn that went into it during transport
Rudder
Landing gear: this is an old Fema. Works well, but I never replaced the axle pin for the wheel, just so you know.
Fuselage: Brand new!! This was produced from my original fuselage who saw much better days. Due to the pandemic, the project stopped, so you will need to add the canopy/canopy frame. That can still be bought from MCM in France (
http://www.mcmod.fr/). Fuselage is perfect, just need the seams cleaned, that's all.
My Crystal was 12kgs, with that fuselage, you should be around 9 or 10 as a wild guess
So, a bit of work, but not that much really (put the wings on, rudder and elevator), and you'll find yourself with a nice 5m machine.
200€
