Author Topic: Seagull Ka8b - Engine install and mods  (Read 29678 times)

Kevin O'Donoghue

  • ISR Club Member
  • Newbie
  • *
  • Posts: 101
    • View Profile
Re: Seagull Ka8b - Engine install and mods
« Reply #30 on: July 03, 2023, 13:06:21 PM »
Hi Fred. You are right about the decalage. I had to raise the tailplane LE by a few mils to set the decalage at about 1' and not the 5' previously. I can check where my CofG is, but about 50mm is supposed to be right. I think the manual says 60mm +/- 10mm either way.
You likely remember the roller coaster ride when we towed it before changing the tailplane incidence. I need to fly it off the slope yet to check out the adjustment, but it is widely reported on the internet to make this change.