« previous next »
Pages: [1]   Go Down

Author Topic: Scratch Build  (Read 12162 times)

ourblue

  • Newbie
  • *
  • Posts: 5
    • View Profile
Scratch Build
« on: May 17, 2012, 19:51:56 PM »
Its a while since I bought a decent amount of balsa. Looking for a supplier who has some hard balsa for wing building. I'm planning to build an electric Bird of time so i want to make a good job of it.  Dont want to pay excessive postage unless i have to!
Logged
Head in the clouds but feet in the mud.

Fred

  • Slope Soaring is not a crime!
  • Administrator
  • Newbie
  • *****
  • Posts: 5148
  • Gliderist Simplex
    • View Profile
    • http://www.gliderireland.net
Scratch Build
« Reply #1 on: May 18, 2012, 08:49:45 AM »
Hi Ourblue,

I buy my balsa and other woods in France and Germany.
But if you are looking for something slightly more local, I also had good experience with Slec UK and the Balsa Cabin.

Hope this helps,

Fred
Logged
Education is important, but flying RC planes and gliders is importanter!

ourblue

  • Newbie
  • *
  • Posts: 5
    • View Profile
Balsa
« Reply #2 on: May 20, 2012, 08:36:35 AM »
Quote from: "Fred"
Hi Ourblue,

I buy my balsa and other woods in France and Germany.
But if you are looking for something slightly more local, I also had good experience with Slec UK and the Balsa Cabin.

Hope this helps,

Fred

Hi Fred,
     Thanks for replying. I'll go with Slec. I used to order from Balsa cabin when i lived in Scotland. Been in contact with George Voss in the States to get the ribs cut. Island models were also very helpful but I dont have the right cad file.
                           regards
                                       Bob
ps enjoy the easterlies!
Logged
Head in the clouds but feet in the mud.

Fred

  • Slope Soaring is not a crime!
  • Administrator
  • Newbie
  • *****
  • Posts: 5148
  • Gliderist Simplex
    • View Profile
    • http://www.gliderireland.net
Scratch Build
« Reply #3 on: May 24, 2012, 21:31:17 PM »
Sorry, only catching up!!  :oops:

YEah, as I said, the problem with scanned plans then laser cut, is that it is very inaccurate, unless you spend a lots of time re-drawing everything, but in this case, it would be quicker to draw the plan from scratch!
This is I think the case for some of the Old C. Williams plans that you can have laser cut, they are all inacurrate, as sometimes the files were made with re-prints (plan then lose accuracy).

And Easterlies for the week end!  :!:  At least, it will be sunny!  :D  :D
Logged
Education is important, but flying RC planes and gliders is importanter!

BAT

  • Newbie
  • *
  • Posts: 1
    • View Profile
Scratch Build
« Reply #4 on: December 21, 2012, 14:35:39 PM »
Quote from: "Fred"
Sorry, only catching up!!  :oops:

YEah, as I said, the problem with scanned plans then laser cut, is that it is very inaccurate, unless you spend a lots of time re-drawing everything, but in this case, it would be quicker to draw the plan from scratch!
This is I think the case for some of the Old C. Williams plans that you can have laser cut, they are all inacurrate, as sometimes the files were made with re-prints (plan then lose accuracy).

And Easterlies for the week end!  :!:  At least, it will be sunny!  :D  :D
#

I've got the B.O.T cad dwgs. and a laser cutter. Sounds like we should talk!
Logged

Fred

  • Slope Soaring is not a crime!
  • Administrator
  • Newbie
  • *****
  • Posts: 5148
  • Gliderist Simplex
    • View Profile
    • http://www.gliderireland.net
Scratch Build
« Reply #5 on: December 21, 2012, 14:45:23 PM »
Welcome to the forum  :D

I'm ok, thanks, I think after this thread, I received the cad files for the ribs of the BOT from someone in Australia  :D
Maybe Bob is still interrested?
Logged
Education is important, but flying RC planes and gliders is importanter!

ourblue

  • Newbie
  • *
  • Posts: 5
    • View Profile
Scratch Build
« Reply #6 on: December 21, 2012, 19:45:38 PM »
Hi Steve,
     Got the wing ribs from George Voss in Oklahoma. He used to build fuselages for the BOT. Theses a build log here but i wouldnt use the al wing joiner system as i had a wing tip float down. Not much damage.
Build log
http://www.rcgroups.com/forums/showthread.php?t=1742923

video
[youtube]http://www.youtube.com/v/Xvs_Glmt9Ds[/youtube]

will be great as a camera platform. Bought the 808 #16 keychain wide angle HD but weather has not been too kind.
If i need a complete rebuild or friends are interested we know where to come!
Thanks again for getting back

[youtube]http://www.youtube.com/v/UpJolyDT4f8[/youtube]
Logged
Head in the clouds but feet in the mud.

Freedom Flyer

  • Newbie
  • *
  • Posts: 69
    • View Profile
Scratch Build
« Reply #7 on: February 23, 2013, 23:19:21 PM »
Bob,

Nice looking B.O.T.  My two older brothers each have one of those they fly very respectively.  One brother slope soars his, the other has a little O.S. Max .15 on a power pod on his. My brother Wayne and I haul his up with my trusty old Hobby Lobby Telemaster Senior. It seems to work pretty well, hope to see more pics and video. FF


We normally haul smaller planes up, so it looked pretty funny the first time we hauled this one up with the wing tips sticking out past the Power plane wings :lol:
Logged
Still learning after all these years
Pages: [1]   Go Up
« previous next »