Author Topic: 33% Kaiser Ka-3 (Read 78701 times)

Alan_Perse · « **Reply #45 on:** November 18, 2012, 14:27:02 PM »

Great work

selleri · « **Reply #46 on:** November 18, 2012, 23:02:20 PM »

Thanks guys.

Ailerons almost finished.

Now the glue on the horn just needs to dry.

Happy Days · « **Reply #47 on:** November 19, 2012, 13:14:28 PM »

I must say Selleri, I’m very impressed that you clear up your workroom every time you take a picture.

I wish I could get into that habbit ..... Mine looks like a complete dump :roll:

Keith

selleri · « **Reply #48 on:** November 19, 2012, 18:14:47 PM »

Don't worry Keith I've got two other tables at the moment for "other stuff!" :lol:

I'll take a picture though they are looking rather clean at the moment as I've used up most of the wood.

selleri · « **Reply #49 on:** November 20, 2012, 02:40:47 AM »

Just for you Keith!

Who says the Germans don't have sense of humor!!!

Balsa blocks give the hinges something to glue to!

Steel sand, heavy and nice.

Not big.

About 500 gr. in the nose, it'll do until I get all the stuff installed but going by the weight Fred put in his I might easily need another 500 gr. At least it's easier to add weight than remove it!

Dry, dry!

Hmmm, something brewing on the side

Happy Days · « **Reply #50 on:** November 20, 2012, 07:41:16 AM »

Thanks for those first two pictures Selleri. I was beginning to get an inferiority complex. I shall sleep much better now. Hmmmm zzzzzzz.

K.

selleri · « **Reply #51 on:** November 23, 2012, 17:30:13 PM »

No problem Keith! :lol:

Added plywood on either side as I need a bit more material for my skid.

Ashlok/Molex connectors keep us plugged in.

Heatshrink on joins.

Equipment plate in the wing area.

Magnets will be used to attach the dashboard.

Then it's on to cutting some plastic.

Three sides ready for some fun.

Primer is sanded off where the canopy plastic is glued to the frame.

Then we apply some glue and wait for it to dry.

After it has dried it's time to get more precise for application of the internal seam. Syringe, silicone tube and a molested q-tip.

Voila!

johnfireball · « **Reply #52 on:** November 23, 2012, 23:01:34 PM »

Hi Selleri,
Nice work. Is that an orange reciever I see in there, some of them are only suitable for park fliers, range is limited to 300 meters. I would be wary of using one in your masterpiece.
John.

selleri · « **Reply #53 on:** November 24, 2012, 01:37:18 AM »

Cheers John, no worries it's just for the setup work, don't want any dust on my fancy rx! :lol:

Guide for the dashboard.

Dashboards fastners being glued in.

All the plastic is glued in but I still need to glue the insides of the sides.

Alan_Perse · « **Reply #54 on:** November 24, 2012, 09:41:27 AM »

Great work Selleri. Those Ashlok connectors look very useful. Where can you get them?

selleri · « **Reply #55 on:** November 24, 2012, 18:47:39 PM »

Cheers, Phil at Fighteraces is going to sell them soon, Ashtek used to sell them but they quit some time ago.

selleri · « **Reply #56 on:** November 26, 2012, 01:06:41 AM »

Added a list for the covering to sit on.

I think I can live with this.

Everything going on under the hood.

selleri · « **Reply #57 on:** November 27, 2012, 01:33:18 AM »

Skid material drying.

Fred · « **Reply #58 on:** November 27, 2012, 08:06:29 AM »

As usual, very neat job! :clap:
Quick question for you. What glue are you using to glue the canopy to the frame? :?: Epoxy?

selleri · « **Reply #59 on:** November 27, 2012, 08:52:24 AM »

Cheers, Hysol 9462.

News:

Author Topic: 33% Kaiser Ka-3 (Read 78701 times)